Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. ASMi-52
  5. Manuel D’Utilisation

RAD Data comm ASMi-52 Manuel D’Utilisation

Télécharger
Page de 186
Chapter 4  Configuration 
Installation and Operation Manual 
4-18 
Configuring ASMi-52 System Parameters
 
ASMi-52 Ver. 2.5 
ASMi-52 
Port Control 
1. Port Control Mode 
  > (Terminal) 
2. Terminal  > 
3. Dial out  > 
4. Save 
 
>  
 
ESC-prev. menu; !-main menu; &-exit; @-scroll 
Figure 4-22.  Port Control Menu 
Configuring the Port Control Mode 
The Control port of ASMi-52 operates in one of the following modes: 
•  Terminal – direct connection to the control terminal (DCE mode) or to the 
modem (DTE mode) 
•  Dial-out – connection to a dial-out modem for alarm reporting 
• 
 
Currently, the connection to ASMi-52 via SLIP is disabled. 
 
 
To configure port control mode: 
1.  From the Port Control menu, select Port Control Mode (Main menu > 
Configuration > System Configuration > Control Port > Port Control > Port 
Control Mode). 
The Port Control Mode menu appears (see 
Figure 4-23
). 
ASMi-52 
Port Control Mode (Terminal) 
1. Terminal 
2. Dial out 
 
>  
 
ESC-prev.menu; !-main menu; &-exit; @-scroll 
Figure 4-23.  Port Control Mode Menu 
2.  From the Port Control Mode menu, select the required operation mode. 
3.  From the Port Control menu, select Save to save the change. 
Configuring User Name, Password, Pop-up Alarms and Security 
Timeout 
The user name, password, pop-up alarms and security timeout are configured via 
the Terminal menu. 
 
To access the Terminal menu: 
•  From the Port Control menu, select Terminal (Main menu > Configuration > 
System Configuration > Control Port > Port Control > Terminal). 
The Terminal menu appears (see 
Figure 4-24
). 
Note