RAD Data comm ASMi-52 Manuel D’Utilisation
Chapter 4 Configuration
Installation and Operation Manual
4-38 Additional
Tasks
ASMi-52 Ver. 2.5
•
The physical port alarms are described in
Chapter 5
.
2. Type N to display the next page.
Accessing the Remote ASMi-52
Accessing the remote ASMi-52 is performed using a virtual connection with your
terminal physically connected to the local unit.
terminal physically connected to the local unit.
To access the remote ASMi-52
1. From the Monitoring menu (
1. From the Monitoring menu (
Figure 4-38
), select Open Virtual Connection
(Main menu > Monitoring > Open Virtual Connection).
2. The Login screen of the second ASMi-52 appears.
3. Login to the second ASMi-52.
3. Login to the second ASMi-52.
You now have access to the second ASMi-52 menus.
•
If no key press is sensed for a period of 10 minutes, the virtual connection closes
and you are returned to the initial ASMi-52.
and you are returned to the initial ASMi-52.
To close a virtual terminal
• From the Monitoring menu of the second ASMi-52, select Close Virtual
• From the Monitoring menu of the second ASMi-52, select Close Virtual
Connection
.
The Main menu of the first ASMi-52 is displayed.
Entering the User Name and Password
Once you have installed the ASMi-52 modems at the central and remote locations,
and have completed the installation and operation procedures described in
Chapter 2
and
Chapter 3
, you can start a control session.
You have to enter a user name and password in order to start the ASMi-52
management software (see
management software (see
Figure 4-41
and
Figure 4-42
).
ASMi-52
USER NAME:
PASSWORD:
PASSWORD:
Figure 4-41. Password Request Screen (Terminal Session)
Note
Note