RAD Data comm ASMi-52 Manuel D’Utilisation

Chapter 4  Configuration 

Installation and Operation Manual 

4-42 Additional 

Tasks

 

ASMi-52 Ver. 2.5 

2.  From the TFTP menu, perform the following steps: 

 

Select TFTP IP Server and enter the IP address of the TFTP server  

 

Select TFTP File Name and enter the name of the software file (for 
example, 201e24.img). 

 

Select TFTP Retry Timeout and specify intervals between connection 
retries (in seconds). 

 

Select TFTP Total Timeout and specify the TFTP connection timeout (in 
seconds). 

 

Select Save to save the TFTP configuration. 

 

Select Transfer Command to start downloading file to ASMi-52. 

ASMi-52 automatically erases the backup partition. Once downloading is 
completed, ASMi-52 saves the new release as an active partition, the 
former active partition becomes the backup. 
Once downloading is complete, ASMi-52 decompresses the release file, 
displaying the following message: 
Final process download. Reset 
After the decompression, ASMi-52 saves the new release as an active 
partition, the former active partition becomes backup. Then the unit resets 
itself. This causes the new software to be loaded into the modem's RAM. 

• 

 

•  Installation of the new software releases via XMODEM is not possible over 

•  To minimize the software downloading time, it is recommended to configure the 

 

 

To install a new software release via XMODEM: 
1.  From the SW & File Transfer menu, select XMODEM (Main menu > File 

Utilities > SW & File Transfer > SW Download > XMODEM). 

ASMi-52 responds with the following string: