Sagem 1500 Manuel D’Utilisation
4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of
E
E
E
E
Page 4-51
4.9.3 Routing
Table
Parameter
Description
Flags
Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.
Network Address
Destination IP address.
Netmask
The subnetwork associated with the destination.
This is a template that identifies the address bits in the destination address used
for routing to specific subnets. Each bit that corresponds to a “1” is part of the
subnet mask number; each bit that corresponds to “0” is part of the host number.
for routing to specific subnets. Each bit that corresponds to a “1” is part of the
subnet mask number; each bit that corresponds to “0” is part of the host number.
Gateway
The IP address of the router at the next hop to which frames are forwarded.
Interface
The local interface through which the next hop of this route is reached.
Metric
When a router receives a routing update that contains a new or changed
destination network entry, the router adds 1 to the metric value indicated in the
update and enters the network in the routing table.
destination network entry, the router adds 1 to the metric value indicated in the
update and enters the network in the routing table.