RAD Data comm IPmux-16 Manuel D’Utilisation

 

Inband TFTP Download Procedure 

D-1 

New IPmux-16 software version can be downloaded to the IPmux-16 using TFTP. 

There are three procedures possible: 
•  Users who access IPmux-16 using Telnet can perform software download and 

configuration upload/download using the configuration screens. For details, 
see TFTP in Chapter 3. 

•  Users who have access to the RADview Network Management. For more 

details refer to RADview-HPOV Network Management System for IP 

•  Users who access a MIB browser. The TFTP downloading procedure is 

illustrated in Figure D-1. 

IPmux-16
IP 192.168.113.5

IPdata

IPdata

NMS Server 
IP 192.168.113.2

  IP
Network

Figure D-1.  TFTP Downloading Procedure 

The IPmux-16 manager station must be equipped with a TFTP server and 

the new software. 

 

 

 

➤ 

To start download: 
1.  Set the appropriate IPmux-16 MIB parameter. The IPmux-16 then sends 

requests to the TFTP server (where the new software resides) and receives 
packets of data. 

2.  If there is no TFTP server available to the main manager, assign a station where 

there is a TFTP server installed. This server becomes a secondary manager. In 
this case, the main manager only initiates the download process (by setting the 

MIB parameter), which is then performed between the IPmux-16 and the 
TFTP server.