RCA 605 Manuel D’Utilisation

E-DOC-CTC-20051017-0151 v1.0

Expert Configuration

# marked:
The number of packets that exceeded the mark rate and - as a consequence - 
are marked.

# compliant:
The number of packets that comply to the IPQoS meter rate limits and - as a 
consequence - can pass.

To add a new IPQoS rate limiting entry:

Click New.

Type:

a Name for the new entry.

the Drop and Mark rate

the Burst size

Select:

the Interface to which the entry applies

Drop action
You can either choose to simply count the number of packets that exceed 
the drop rate, or to effectively drop them.

Mark action
You can either choose to simply count the number of packets that exceed 
the mark rate, or to effectively mark them.

Marking
In case you have chosen to mark packets that exceed the mark rate, you 
can select what marking is applied: TOS, DSCP, or Precedence.

Select Disabled in case no marking must be applied.

Classification
You can select:

ignore, so that no changes are made to the classification

overwrite, so that the internal priority will be overwritten, no matter 
what the value is

decrease, so that the internal priority will only be overwritten in 
case the value defined is lower than the value upon arrival

offset, to effectively lower the priority setting with a relative offset 
as defined in Class value.

Class
The class or offset used for classification.

Click Apply.

Depending on the selected marking you must also select an 
appropriate TOS, DSCP or Precedence value.