Schneider Electric SM5200 Manuel D’Utilisation
16
C4688M (8/12)
VIDEO STORAGE
From the Pelco Web Viewer, users export recorded footage onto the system manager’s integrated storage array for safekeeping and future
access. The SM5200 supports up to 12 TB of video storage.
access. The SM5200 supports up to 12 TB of video storage.
The video storage pie chart displays the percentages of used and available video storage.
NOTE: You can free Video Storage by deleting videos from the Export Manager.
FAN STATUS
The SM5200 contains five fans. Each fan’s status appears under Fan Status. Fans that are working properly display a green check
; fans that
have failed display a red alarm
.
NOTE: Fan failures will cause the unit’s internal temperature to rise, which can potentially result in hardware damage. Contact your Endura
system administrator or Pelco Product Support if any of your fans fail.
system administrator or Pelco Product Support if any of your fans fail.
DISK STATUS
The SM5200 contains up to six hard disk drives depending on model. Disk Status displays the status of your system manager’s drives; functioning
drives display a green check
; failed drives display a red alarm
.
Disks 1 and 2 are SSDs (Solid State Drives) containing the operating system in a RAID 1 configuration. Replace failed disks in drive bays 1 or 2
with Pelco-provided SSDs immediately to prevent a potential loss of system integrity. After replacing a failed drive, the new drive begins
rebuilding automatically to re-establish RAID 1 parity.
with Pelco-provided SSDs immediately to prevent a potential loss of system integrity. After replacing a failed drive, the new drive begins
rebuilding automatically to re-establish RAID 1 parity.
Disks 3 through 6 are HDDs (Hard Disk Drives) used for video storage in JBOD or RAID 5 format, depending on your configuration. RAID 5 ensures
data integrity with one disk failure. Replace failed disks before a second drive fails to prevent data loss.
data integrity with one disk failure. Replace failed disks before a second drive fails to prevent data loss.
For more information about the system manager’s drive array, refer to your installation manual.
POWER STATUS
Power Status shows whether the unit is drawing power from a primary AC source or, in the event of a power failure, an uninterruptable power
supply (UPS). A green check
indicates that the unit is drawing primary power; a yellow exclamation point
indicates that primary power
has failed an the unit is drawing power from an UPS.
It is recommended that you connect your SM5200 to the APC SmartUPS unit to prevent system failures or data loss due to power outages.