Trango Broadband High Density Mesh System Manuel D’Utilisation

HD Mesh Node 

 

 

Trango Broadband Wireless — High Density MESH 

page 7 

 

 

It is always a good idea to first provision and test the equipment on the bench before deploying them in the 
field.  This is a particularly useful exercise for the novice user. 
 

 
Open the box by flipping up the quick release lockable latches. 
 
 
 
 
 
 
 
 
 

 

 

                    

 

Figure 3 
                          
 

•  Power is applied to the HD Mesh unit via the Power Input Terminals located at the bottom left hand 

corner inside the box.   

•  There are 5 PoE ports to provide connection to 5 Trango Broadband radios. Connect a Cat-5 (straight 

through) Ethernet cable (Trango Broadband recommends shielded twisted pair) between the POE 
port of the HD Mesh unit and the RJ-45 connector on the radio.   

•  Both green LEDs on the POE of the HD Mesh should be lighted, indicating power is present to the 

POE as well as the radio. (Figure 3) 

Flip Up 

Pull away from box 

Note: Improper wiring of 
power may power unit but 
may cause damage to 
system.