Telenetics 326X V.34 Manuel D’Utilisation
C-42 Country-Specific Information
Countr
y
-S
pecific
Inf
o
rm
a
tion
Telco Option (AT&J)
Telco displays only on U. S. A. and Canadian 326X Series Modems. It is used to
select the RJ-jack type. Telco corresponds to the AT&J command as follows:
select the RJ-jack type. Telco corresponds to the AT&J command as follows:
Declaring The Jack Type
Once 326x Ready displays, you must declare the jack type you used to connect your
modem to the dial/leased line so that the modem recognizes this connection
(see Tables C-16 or C-18). You can declare the jack type as follows:
modem to the dial/leased line so that the modem recognizes this connection
(see Tables C-16 or C-18). You can declare the jack type as follows:
1) Press
until TELCO OPT'S is displayed.
2) Use
to move through the TELCO OPT'S menu until Telco = jack type is
displayed. For example, you may see Telco = RJ16C in the display.
3) Press
until you see the jack type you used to connect your modem to the
dial/leased line. For example, you can select Telco:RJ11C.
4) Press
. In this example Telco = RJ11C is displayed.
You have now declared to the modem the jack type you are using.
If this is the first-time you are installing the modem, the modem is set
(factory default) for connection to an RJ11C permissive jack. Installation is
complete.
(factory default) for connection to an RJ11C permissive jack. Installation is
complete.
If this is not a first-time installation, connect the modem to an RJ45S
programmable jack and set the Telco option for this jack type. To use a
programmable jack, contact your telephone company to arrange for installation.
programmable jack and set the Telco option for this jack type. To use a
programmable jack, contact your telephone company to arrange for installation.
NOTE: You can also select the dial line jack type using the AT&J command.
Refer to Appendix A for details.
Refer to Appendix A for details.
Option Setting
AT Command
RJ11C
0, 1
RJ45S
2
RJ16C
3
RJ4MB
4