Avaya G250 Manuel D’Utilisation

Note:

If the Encapsulation field of the Ethernet WAN Port Configuration - General Tab 
is set to ARPA, the PPPoE client is not supported and returns a result of N/A in 
all fields of the Ethernet WAN Port Configuration - PPPoE Client Tab. 

Note:

All fields in the Ethernet WAN Port Configuration - PPPoE Client tab are 
read-only except for Negotiated IP and Request DNS Servers.

The operational status of the PPPoE connection. Possible values are:

●

Up - The interface is up and can transmit and receive packets.

●

Down - The interface is down due to a fault and cannot transmit or 
receive packets.

●

Testing - The interface is in testing mode and cannot transmit or 
receive regular data.

●

Partially Down - The interface is up. However, some interfaces 
layered on top of this interface are Down. Some packets can be 
transmitted and received.

●

Admin Down - The interface has been shut down in the device 
configuration and cannot transmit or receive packets.

●

Dormant Down - The interface is down due to no packets being sent 
or received for a long period of time. For more information, refer to the 
Administration for the Avaya G250 and Avaya G350 Media Gateways.

●

KeepAlive Down - The interface is down due to not having received a 
KeepAlive packet in the configured interval. For more information, 
refer to Administration for the Avaya G250, Avaya G350, and Avaya 
G450 Media Gateways.

●

Enable/Disable PPP-IPCP IP address negotiation. When enabled, the WAN 
fast Ethernet interface receives an IP address from the remote peer. 

The IP address received from the remote peer during the IP negotiation 
phase.

Whether to request DNS server information from the remote peer. Possible 
values are:

●

Enable - Request DNS server information from the remote peer. 

●

Disable - Do not request DNS server information from the remote 
peer.