Avaya X330WAN Manuel D’Utilisation
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
195
router vrrp
Use the router vrrp command to enable VRRP routing globally. The no form
of this command disables VRRP routing.
of this command disables VRRP routing.
Note:
You can not activate both VRRP and SRRP protocols at the same time.
Syntax
[no] router vrrp
show fragment
Use the
show fragment
command to display information regarding fragmented IP
packets that are destined to the router.
Note:
No IP reassembly will be performed on packets in transit through the router.
This command displays the following information:
•
•
Size
— Maximum number of packets set by the fragment size command.
•
Chain
— Maximum number of fragments for a single packet set by the
fragment chain command.
•
Timeout
— Maximum number of seconds set by the fragment timeout
command.
•
Queue
— Number of packets currently awaiting reassembly.
•
Assemble
— Number of packets successfully reassembled.
•
Fail
— Number of packets which failed to be reassembled.
•
Overflow
— Number of packets which overflowed the fragment database.
Syntax
show fragment
Example
X330WAN-2DS1-1(configure)# show fragment
Max number of concurrently reassembled packets is 100
Max number of fragments per packet is 64
Fragment timeout is 10 sec
Number of packets waiting to be reassembled is 0
Number of successfully reassembled packets is 11954
Number of packets which failed to be reassembled is 0
Number of packets which overflowed the database is 0