C Technologies C-Pen Manuel D’Utilisation
71
USING C-PEN WITH YOUR PC
A working connection with a PC is required to install and
remove applications in C-Pen. To enable this communica-
tion certain hardware and software must be installed and
configured properly on your PC.
remove applications in C-Pen. To enable this communica-
tion certain hardware and software must be installed and
configured properly on your PC.
The following is required for IR communication:
1. An IR port. Laptops often have a built-in IR port. Refer
to your PC’s manual to find out whether your PC is
equipped with an IR port and if so, where it is located.
Most desktop PCs do not have a built-in IR port. In this
case you must use an external IR adapter. Contact your
retailer if you do not have an IR adapter.
equipped with an IR port and if so, where it is located.
Most desktop PCs do not have a built-in IR port. In this
case you must use an external IR adapter. Contact your
retailer if you do not have an IR adapter.
2. Infrared drivers are included on the C-Pen CD. It is
crucial to install the infrared driver properly.
3. C-Win Software. This software is installed from the
C-Pen CD.
The following is required for cable communication:
1. Cable. The cable is included in the C-Pen package.
2. COM port (serial port). The cable should be plugged
into an available COM port on your PC.
3. C-Win Software. This software is installed from the C-
Pen CD.
Installing C-Win Software
C-Win Software and the infrared driver – if required – are
installed when you run the installation programs on the C-
Pen CD. The menu option Documentation on the C-Pen
CD contains the User's Guide and Help. The installation
installed when you run the installation programs on the C-
Pen CD. The menu option Documentation on the C-Pen
CD contains the User's Guide and Help. The installation