ZyXEL Communications NSA-2401 Manuel D’Utilisation
Chapter 6 Storage Screens
NSA-2401 User’s Guide
138
The following table describes the labels in this screen.
6.5.1 Creating a New RAID
Click the Create icon in the RAID screen as shown in
to create a new
RAID array.
Figure 129 Storage > Internal Storage > RAID > Create
Sort
Click a column’s heading cell to sort the table entries by that column’s
criteria. Click the heading cell again to reverse the sort order.
Click a column’s heading cell to sort the table entries by that column’s
criteria. Click the heading cell again to reverse the sort order.
Status
This icon shows Healthy, Resynching, Degraded or Down; see
This icon shows Healthy, Resynching, Degraded or Down; see
If an array is degraded, click the Repair icon after you
have replaced the faulty disk.
Table 26 Storage > Internal Storage > RAID
LABEL
DESCRIPTION
Label
This field shows the name of the array.
RAID Level
This field shows which type of data storage system (a RAID level or
JBOD) the array is using. See
JBOD) the array is using. See
for details on the
different levels.
Capacity
This field shows the total size of the array, how much is currently in use,
and how much is still available.
and how much is still available.
Disk
This field shows the hard disks that are in the array.
Hot Spare
If the array has a standby disk, this field identifies it.
Table 25 Storage > Internal Storage > RAID Icons (continued)
ICON
DESCRIPTION