ZyXEL Communications NBG-418N v2 Manuel D’Utilisation
Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
23
By implementing PPPoE directly on the NBG-418N v2 (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the NBG-418N v2 does that part
of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
computers on the LAN do not need PPPoE software installed, since the NBG-418N v2 does that part
of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
Figure 9
Wizard Step 2: PPPoE Connection
The following table describes the labels in this screen.
3.2.2 Dynamic IP Connection
Use the dynamic IP connection when your network administrator or ISP assigns your IP address
dynamically.
dynamically.
Table 4
Wizard Step 2: PPPoE Connection
LABEL
DESCRIPTION
PPPoE
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Confirm Password
Type the password again for confirmation.
Account Validate
Click the Account Validate button to establish the Internet connection via PPPoE
encapsulation.
encapsulation.
Back
Click Back to return to the previous screen.
Next
Click Next to continue.
Exit
Click Exit to close the wizard screen without saving.