ZyXEL Communications NWA1100-N Manuel D’Utilisation
Chapter 12 Remote Management
NWA1100-N User’s Guide
112
timeout period. The management session does not time out when a statistics screen is polling. You
can change the timeout period in the SYSTEM screen.
can change the timeout period in the SYSTEM screen.
12.4 The Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the
NWA’s Command Line Interface (CLI).
NWA’s Command Line Interface (CLI).
Click REMOTE MGNT > TELNET. The following screen displays.
Figure 54
Remote Management: Telnet
The following table describes the labels in this screen.
12.5 The FTP Screen
Use this screen to upload and download the NWA’s firmware using FTP. To use this feature, your
computer must have an FTP client.
computer must have an FTP client.
Table 37
Remote Management: Telnet
LABEL
DESCRIPTION
TELNET
Server Port
You can change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
use the same port number in order to use that service for remote management.
Server
Access
Select the interface(s) through which a computer may access the NWA using
Telnet.
Telnet.
Secured
Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
NWA using this service.
NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the NWA using this service.
to access the NWA using this service.
Secured
Client MAC
Address
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the MAC address that you
specify to access the NWA using this service.
specify to access the NWA using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.