ZyXEL Communications G-3000H Manuel D’Utilisation

G-3000H User’s Guide

Chapter 8 Other Wireless Configurations

105

Figure 46   Layer-2 Isolation Configuration Screen

The following table describes the labels in this screen.

The following section shows you example layer-2 isolation configurations on the ZyAIR (A).

Table 31   Layer-2 Isolation Configuration

Enable Layer-2 

Isolation

Select the Enable Layer-2 Isolation check box to enable layer-2 isolation on the 

ZyAIR.
When you select the Enable Layer-2 Isolation check box and save this 

configuration screen, the Enable Intra-BSS Traffic check box in the Wireless 

configuration screen is cleared. This means that wireless clients connected to the 

ZyAIR cannot communicate with one another. This would be appropriate in a 

hotspot application, for example, in a hotel where wireless clients can access the 

Internet, but cannot communicate with other wireless clients or AP’s. 
If you want wireless clients associated with the ZyAIR to be able to communicate 

with each other, you must select the Enable Intra-BSS Traffic check box in the 

Wireless configuration screen. 

Allow devices with 

these MAC 

addresses

These are the MAC address of a wireless client, AP, computer or router. A wireless 

client associated with the ZyAIR can communicate with another wireless client, 

AP, computer or router only if the MAC addresses of those devices are listed in 

this table.

Set

This is the index number of the MAC address.

MAC Address

Type the MAC addresses of the wireless client, AP, computer or router that you 

want to allow the ZyAIR associated wireless clients to have access to in these 

address fields. Type the MAC address in a valid MAC address format, that is, six 

hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Apply

Click Apply to save your changes back to the ZyAIR.

Reset

Click Reset to begin configuring this screen afresh.