ZyXEL Communications G-3000H Manuel D’Utilisation
G-3000H User’s Guide
212
Chapter 23 Firmware and Configuration File Maintenance
Figure 138 System Maintenance: Backup Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 139 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 140 Backup Configuration Example
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Figure 141 Successful Backup Confirmation Screen
23.3 Restore Configuration
Menu 24.6 –- System Maintenance – Restore Configuration allows you to restore the
configuration via FTP or TFTP to your ZyAIR. The preferred method is FTP. Note that this
function erases the current configuration before restoring the previous backup configuration;
please do not attempt to restore unless you have a backup configuration stored on disk. To
restore configuration using FTP or TFTP is the same as uploading the configuration file,
please refer to the following sections on FTP and TFTP file transfer for more details. The
ZyAIR restarts automatically after the file transfer is complete.
configuration via FTP or TFTP to your ZyAIR. The preferred method is FTP. Note that this
function erases the current configuration before restoring the previous backup configuration;
please do not attempt to restore unless you have a backup configuration stored on disk. To
restore configuration using FTP or TFTP is the same as uploading the configuration file,
please refer to the following sections on FTP and TFTP file transfer for more details. The
ZyAIR restarts automatically after the file transfer is complete.
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###
### Hit any key to continue.###
Type a location
for storing the
configuration file
or click Browse
configuration file
or click Browse
to look for one.
Choose the
Xmodem protocol.
Then click Receive.