ZyXEL Communications G-3000H Manuel D’Utilisation
G-3000H User’s Guide
Chapter 6 Wireless Security Configuration
85
6.12.4 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP
Select 802.1x Dynamic 64 or 802.1x Dynamic 128 in the Security Mode field to display the
following screen.
following screen.
Figure 34 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP
The following table describes the labels in this screen.
Authentication
Databases
The authentication database contains wireless station login information. The local
user database is the built-in database on the ZyAIR. The RADIUS is an external
server. Use this drop-down list box to select which database the ZyAIR should use
(first) to authenticate a wireless station.
Before you specify the priority, make sure you have set up the corresponding
Before you specify the priority, make sure you have set up the corresponding
database correctly first.
Select Local User Database Only to have the ZyAIR just check the built-in user
Select Local User Database Only to have the ZyAIR just check the built-in user
database on the ZyAIR for a wireless station's username and password.
Select RADIUS Only to have the ZyAIR just check the user database on the
Select RADIUS Only to have the ZyAIR just check the user database on the
specified RADIUS server for a wireless station's username and password.
Select Local first, then RADIUS to have the ZyAIR first check the user database
Select Local first, then RADIUS to have the ZyAIR first check the user database
on the ZyAIR for a wireless station's username and password. If the user name is
not found, the ZyAIR then checks the user database on the specified RADIUS
server.
Select RADIUS first, then Local to have the ZyAIR first check the user database
Select RADIUS first, then Local to have the ZyAIR first check the user database
on the specified RADIUS server for a wireless station's username and password. If
the ZyAIR cannot reach the RADIUS server, the ZyAIR then checks the local user
database on the ZyAIR. When the user name is not found or password does not
match in the RADIUS server, the ZyAIR will not check the local user database and
the authentication fails.
Apply
Click Apply to save your changes back to the ZyAIR.
Reset
Click Reset to begin configuring this screen afresh.
Table 22 Security: 802.1x Only, 802.1x Static 64-bit WEP, 128-bit WEP
LABEL
DESCRIPTION
Table 23 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP
LABEL
DESCRIPTION
Name
Type a name to identify this security profile.
Security Mode
Choose 802.1x Dynamic 64 or 802.1x Dynamic 128 in this field.