ZyXEL Communications NBG6503 Manuel D’Utilisation
NBG6503 User’s Guide
137
C
HAPTER
19
Bandwidth Management
19.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL’s Bandwidth Management allows you to specify bandwidth management rules based on an
application.
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
Figure 94 Bandwidth Management Example
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
applications (like VoIP, Web, FTP, and E-mail for example).
19.2 What You Can Do
• Use the General screen (
) to enable bandwidth management and
assign bandwidth values.
• Use the Advanced screen (
) to configure bandwidth managements rule
for the pre-defined services and applications.
• Use the Monitor screen (
) to view the amount of network bandwidth
that applications running in the network are using.
A
B
-> VOIP
-> FTP
-> HTTP
-> FTP
-> HTTP
-> Chat, Email