ZyXEL Communications NBG6503 Manuel D’Utilisation

Chapter 4 Monitor

NBG6503 User’s Guide

The following table describes the labels in this screen.

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information 
here includes port status, packet specific statistics and the "system up time". The Poll Interval(s) 
field is configurable and is used for refreshing the screen.

Figure 24   Summary: Packet Statistics 

The following table describes the labels in this screen.

Table 14   Summary: DHCP Table

# 

This is the index number of the host computer.

MAC Address

This field shows the MAC address of the computer with the name in the Host Name field.

Every Ethernet device has a unique MAC (Media Access Control) address which uniquely 
identifies a device. The MAC address is assigned at the factory and consists of six pairs of 
hexadecimal characters, for example, 00:A0:C5:00:00:02.

IP Address

This field displays the IP address relative to the # field listed above.

Expires in

This field displays the time when the IP address and MAC address association ends.

Refresh

Click Refresh to renew the screen. 

Table 15   Summary: Packet Statistics

Port

This is the Router’s port type.

Status 

For the LAN ports, this displays the port speed and duplex setting or Down when the line is 
disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet 
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping 
a call) if you're using PPPoE or PPTP encapsulation. This field displays Down when the line is 
disconnected.

For WLAN 2.4G/5G, it displays the maximum transmission rate when the WLAN 2.4G/5G is 
enabled and Down when the WLAN 2.4G/5G is disabled.

TxPkts 

This is the number of transmitted packets on this port.

RxPkts 

This is the number of received packets on this port.