ZyXEL Communications NBG6503 Manuel D’Utilisation
Chapter 9 Tutorials
NBG6503 User’s Guide
77
9.4 Enabling and Configuring Wireless Security (No WPS)
This example shows you how to configure wireless security settings with the following parameters
on your Router.
on your Router.
Follow the steps below to configure the wireless settings on your Router.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
logged into the Web Configurator through your LAN connection (see
1
Open the Wireless LAN > General screen in the AP’s Web Configurator.
2
Enable Wireless LAN.
3
Enter SSID_Example3 as the SSID and select a channel.
4
Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared
Key field. Click Apply.
Key field. Click Apply.
Figure 52 Tutorial: Network > Wireless LAN > General
SSID
SSID_Example3
Channel
6
Security
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)