ZyXEL Communications NBG6503 Manuel D’Utilisation

 Chapter 10 Wireless LAN

NBG6503 User’s Guide

A Wireless Distribution System is a wireless connection between two or more APs. Use this screen 
to set the operating mode of your Router to AP + Bridge or Bridge Only and establish wireless 
links with other APs. You need to know the MAC address of the peer device, which also must be in 
bridge mode. 

Note: You must enable the same wireless security settings on the Router and on all 

wireless clients that you want to associate with it.

The WDS feature is only available in wireless 2.4G network.

Click Network > Wireless LAN 2.4G > WDS tab. The following screen opens with the Basic 
Setting set to AP+Bridge, and Security Mode set to WEP.

Figure 69   Network > Wireless LAN 2.4G > WDS

WLAN Status

Select On or Off to specify whether the Wireless LAN is turned on or off. This field works in 
conjunction with the Day and Except for the following times fields.

Day

Select Everyday or the specific days to turn the Wireless LAN on or off. If you select 
Everyday you can not select any specific days. This field works in conjunction with the  
Except for the following times field.

For the 
following times 
(24-Hour 
Format)

Select a begin time using the first set of hour and minute (min) drop down boxes and 
select an end time using the second set of hour and minute (min) drop down boxes. If you 
have chosen On earlier for the WLAN Status the Wireless LAN will turn on between the two 
times you enter in these fields. If you have chosen Off earlier for the WLAN Status the 
Wireless LAN will turn off between the two times you enter in these fields. 

Apply

Click Apply to save your changes back to the Router.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 40   Network > Wireless LAN 2.4G/5G > Scheduling (continued)