ZyXEL Communications ZLD Manuel D’Utilisation
Chapter 25 Device HA
ZyWALL (ZLD) CLI Reference Guide
227
25.6.3 Link Monitoring Commands
This table lists the commands for link monitoring. Link monitoring has the master ZyWALL shut
down all of its VRRP interfaces if one of its VRRP interface links goes down. This way the backup
ZyWALL takes over all of the master ZyWALL’s functions.
down all of its VRRP interfaces if one of its VRRP interface links goes down. This way the backup
ZyWALL takes over all of the master ZyWALL’s functions.
[no] device-ha sync port <1..65535>
Specifies the port number to use to synchronize with the specified
ZyWALL router. The
ZyWALL router. The
no
command resets the port to 21.
[no] device-ha sync authentication
password password
Specifies the password to use when synchronizing. Every router in the
virtual router should use the same password. The
virtual router should use the same password. The
no
command resets
the password to “1234”.
password
: You can use 4-63 alphanumeric characters, underscores (_),
dashes (-), and
#%^*={}:,.~
characters.
[no] device-ha sync auto
Specifies whether or not to automatically synchronize at regular
intervals.
intervals.
[no] device-ha sync interval <5..1440>
Specifies the number of minutes between each synchronization if the
ZyWALL automatically synchronizes with the specified ZyWALL router.
The
ZyWALL automatically synchronizes with the specified ZyWALL router.
The
no
command resets the interval to five minutes.
[no] device-ha sync now
Synchronize now.
Table 129
device-ha Commands: Synchronization (continued)
COMMAND
DESCRIPTION
Table 130
device-ha Commands: Synchronization
COMMAND
DESCRIPTION
device-ha link-monitoring activate
Turns on device HA link monitoring.
no device-ha link-monitoring
Turns off device HA link monitoring.
show device-ha link-monitoring
Displays the current link monitoring setting.
device-ha stop-stub-interface activate
Has the master ZyWALL shut down any 3G or wireless LAN interfaces if one
of its VRRP interface links goes down.
of its VRRP interface links goes down.
no device-ha stop-stub-interface
Has the master ZyWALL not shut down any 3G or wireless LAN interfaces if
one of its VRRP interface links goes down.
one of its VRRP interface links goes down.
show device-ha stop-stub-interface
Displays whether or not the ZyWALL is set to have the master ZyWALL shut
down any 3G or wireless LAN interfaces if one of its VRRP interface links
goes down.
down any 3G or wireless LAN interfaces if one of its VRRP interface links
goes down.