ZyXEL Communications USG 2000 Manuel D’Utilisation
Chapter 13 Interfaces
ZyWALL USG 2000 User’s Guide
281
13.2.1 Port Grouping Overview
Use port grouping to create port groups and to assign physical ports and port
groups to Ethernet interfaces.
groups to Ethernet interfaces.
Each physical port is assigned to one Ethernet interface. In port grouping, the
Ethernet interfaces are called representative interfaces. If you assign more
than one physical port to a representative interface, you create a port group.
Port groups have the following characteristics:
Ethernet interfaces are called representative interfaces. If you assign more
than one physical port to a representative interface, you create a port group.
Port groups have the following characteristics:
• There is a layer-2 Ethernet switch between physical ports in the port group. This
provides wire-speed throughput but no security.
• It can increase the bandwidth between the port group and other interfaces.
13.2.2 Port Grouping Screen
Define the relationship between physical ports, port groups, and Ethernet
interfaces in the Port Grouping screen. Port grouping does not apply to ports 7
and 8 (the dual-personality Ethernet port and SFP slot pairs). The are always
assigned to interfaces ge7 and ge8, respectively. To access this screen, click
Configuration > Network > Interface > Port Grouping.
interfaces in the Port Grouping screen. Port grouping does not apply to ports 7
and 8 (the dual-personality Ethernet port and SFP slot pairs). The are always
assigned to interfaces ge7 and ge8, respectively. To access this screen, click
Configuration > Network > Interface > Port Grouping.
Figure 248 Configuration > Network > Interface > Port Grouping