ZyXEL Communications USG 2000 Manuel D’Utilisation
Chapter 50 System
ZyWALL USG 2000 User’s Guide
797
The following table describes the labels in this screen.
50.6 WWW Overview
The following figure shows secure and insecure management of the ZyWALL
coming in from the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and
dial-in management access are not secure.
coming in from the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and
dial-in management access are not secure.
Figure 518 Secure and Insecure Service Access From the WAN
• See
for related information on these screens.
Note: To allow the ZyWALL to be accessed from a specified computer using a service,
make sure you do not have a service control rule or to-ZyWALL firewall rule to
block that traffic.
block that traffic.
Table 231 Configuration > System > DNS > Service Control Rule Add
LABEL
DESCRIPTION
Create new
Object
Object
Use this to configure any new settings objects that you need to use in
this screen.
this screen.
Address
Object
Object
Select ALL to allow or deny any computer to send DNS queries to the
ZyWALL.
ZyWALL.
Select a predefined address object to just allow or deny the computer
with the IP address that you specified to send DNS queries to the
ZyWALL.
with the IP address that you specified to send DNS queries to the
ZyWALL.
Zone
Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed
or denied.
or denied.
Action
Select Accept to have the ZyWALL allow the DNS queries from the
specified computer.
specified computer.
Select Deny to have the ZyWALL reject the DNS queries from the
specified computer.
specified computer.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving