ZyXEL Communications 5 Series Manuel D’Utilisation
Chapter 47 SNMP Configuration
ZyWALL 5/35/70 Series User’s Guide
712
47.2 SNMP Traps
The ZyWALL will send traps to the SNMP manager when any one of the following events
occurs:
occurs:
Destination
Type the IP address of the station to send your SNMP traps to.
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or
[ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous
screen.
[ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous
screen.
Table 250 SNMP Configuration Menu Fields (continued)
FIELD
DESCRIPTION
Table 251 SNMP Traps
TRAP #
TRAP NAME
DESCRIPTION
0
coldStart (defined in RFC-1215)
A trap is sent after booting (power on).
1
warmStart (defined in RFC-1215)
A trap is sent after booting (software reboot).
4
authenticationFailure (defined in
RFC-1215)
RFC-1215)
A trap is sent to the manager when receiving any
SNMP get or set requirements with the wrong
community (password).
SNMP get or set requirements with the wrong
community (password).
6
whyReboot (defined in ZYXEL-
MIB)
MIB)
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
when the system is going to restart (warm start).
6a
For intentional reboot:
A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
6b
For fatal error:
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
system reboots because of fatal errors.