ZyXEL Communications 1001H Manuel D’Utilisation
P100IH ISDN Router
Dial-In Server Configuration
7-5
Recv. Authen
This field sets the authentication protocol for incoming
calls. For security reason, setting authentication to none
is strongly discouraged. Options for this field are:
calls. For security reason, setting authentication to none
is strongly discouraged. Options for this field are:
z
CHAP/PAP - Your Prestige will try CHAP first, but
PAP will be used if CHAP is not available.
PAP will be used if CHAP is not available.
z
CHAP – Use CHAP only.
z
PAP – Use PAP only.
z
None – Your Prestige tries to acquire CHAP/PAP
first, but no authentication is required if CHAP/PAP
is not available.
first, but no authentication is required if CHAP/PAP
is not available.
CHAP/PAP
CHAP
PAP
None
Compression
Turn on/off Stac Compression. The default for this field
is Off.
On
Off
Mutual Authen
Some vendors, e.g., Cisco, require mutual
authentication, i.e., the node that initiates the call will
request a user name and password from the far end that
it is dialing to. If the remote node requires mutual
authentication, set this field to Yes.
authentication, i.e., the node that initiates the call will
request a user name and password from the far end that
it is dialing to. If the remote node requires mutual
authentication, set this field to Yes.
Yes/No
O/G Login
Enter in the login name to be used to respond to the
peer’s authentication request.
peer’s authentication request.
O/G Password
Enter in the outgoing password to be used to respond to
the peer’s authentication request.
the peer’s authentication request.
Multiple Link Options:
Max Trans Rate
Enter the maximum data transfer rate between your
Prestige and the remote dial-in user. 64 - At most, one B
channel is used. 128 - A maximum of two channels can
be used. When the Prestige calls back to the remote
dial-in user, the maximum data transfer rate is always
64.
Prestige and the remote dial-in user. 64 - At most, one B
channel is used. 128 - A maximum of two channels can
be used. When the Prestige calls back to the remote
dial-in user, the maximum data transfer rate is always
64.
64/128
Callback Budget
Management:
Management:
Allocated Budget (min
)
This field sets the budget callback time for all the remote
dial-in users. The default for this field is 0 for no budget
control.
dial-in users. The default for this field is 0 for no budget
control.
Default = 0
Period (hr)
This field sets the time interval to reset the above
callback budget control.
callback budget control.