GE GFK-1004B Manuel D’Utilisation
5
5-8
TCP/IP Ethernet Communications User’s Manual – January 1996
GFK-1004B
To list the Monitor commands and Modify commands on the screen, type:
HELP <RET> or
? <RET>
The following table provides a brief description of the Modify commands.
Table 5-2. Modify Commands
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
Command
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Description
ÁÁÁÁÁÁ
chbps
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Change serial port data rate
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
chdate
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Change date (Not recommended if PLC CPU is configured
properly.)
properly.)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
chltime
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Change login timeout
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
chsosw
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Change Soft Switch data (Not recommended .)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
chtime
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Change time (Not recommended if PLC CPU is
configured properly.)
configured properly.)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
clear
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Clear Extended Status buffer, Exception Log,Tallies, or Heap
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
clsosw
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Clear Soft Switch values on TCP/IP Ethernet Interface (Not
recommended.)
recommended.)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
load
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Force TCP/IP Ethernet Interface to be loaded
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
logout
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Exit modify mode
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
net
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Disable/Enable node from network
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ok
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Turns on STATUS OK LED
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ping
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Issues ICMP echo request
ÁÁÁÁÁÁ
rem
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Send command to remote station
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
report
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Report test results
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
repp
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Report ping results
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
restart
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Restart the TCP/IP Ethernet Interface
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
stopp
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Stop ping command
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
stopt
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Stop test command
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
test
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Send test commands to station(s)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
trace
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Turn on specific task trace flags
Date and Time
The Station Manager provides commands to examine the date and time. Any time the
TCP/IP Ethernet Interface is restarted or power to it is cycled, it will attempt to read the
date and time from the PLC CPU. If this fails, the time reverts to midnight and the date
to January 1, 1989; it is only in the case of failure to read date/time from the CPU that
you must set it using the Station Manager. If accurate time stamp information is to be
generated in the Exception Log, the system date and time must be set using the Station
Manager.
TCP/IP Ethernet Interface is restarted or power to it is cycled, it will attempt to read the
date and time from the PLC CPU. If this fails, the time reverts to midnight and the date
to January 1, 1989; it is only in the case of failure to read date/time from the CPU that
you must set it using the Station Manager. If accurate time stamp information is to be
generated in the Exception Log, the system date and time must be set using the Station
Manager.
Station Manager Command Syntax
The Command Descriptions section which follows provides an alphabetical listing of the
commands. Each entry describes the input and output for each command.
commands. Each entry describes the input and output for each command.
All commands have the format of a command followed by a variable number of argu-
ments separated by spaces. Details about the arguments are discussed with each com-
ments separated by spaces. Details about the arguments are discussed with each com-