GE GFK-1004B Manuel D’Utilisation

The NODE command has the form:

This command causes the TCP/IP Ethernet  Interface sign-on message to be printed out
on the screen.  When the TCP/IP Ethernet  Interface is executing the Soft Switch Entry
Utility, the reason that the utility was entered is also displayed.

A typical NODE command is shown below:

This command causes the STATUS OK LED to turn ON.  It has no effect on the contents
of the exception log.

The OK command has the form:

A typical OK command is shown below:

The PING  command has the form:

where 

<node>  is  the  Internet address of the destination.  
<cnt> is the number of ICMP echo requests to send to the destination.  
<sch> is the number of 10 millisecond intervals to wait for a reply from the 

destination, and send the next ICMP echo.

<len> is the length of the ICMP echo message (minimum of 8 bytes).