GE GFK-1004B Manuel D’Utilisation
2
2-15
GFK-1004B
Chapter 2 Installing the Ethernet Interface
5.
Optionally, after you have assigned the IP address, etc., press Page Down to display
the following screen.
the following screen.
The Logicmaster 90-70 Configurator also allows you to optionally configure the MAC
(Station) Address and Network Load Address in TCP/IP configuration mode.
(Station) Address and Network Load Address in TCP/IP configuration mode.
6.
Press the Escape key to return to the rack display. Press Escape again to save the
configuration to disk.
configuration to disk.
7.
Power up the PLC. (See Procedure 3 to verify proper power-up of the Ethernet
Interface.)
Interface.)
8.
Store the configuration to the PLC.
Refer to GFK-0263, Logicmaster 90 Series 90-70 Programming Software User’s Manual for
more information on configuring the Ethernet Interface using Logicmaster 90-70 soft-
ware.
more information on configuring the Ethernet Interface using Logicmaster 90-70 soft-
ware.