GE GFK-1004B Manuel D’Utilisation
3
3-5
GFK-1004B
Chapter 3 The GEnet System Manager–Station Configuration
Installing the PC Network Card (for Network GSM Operation)
The table below lists the 802.3/Ethernet cards that GE Fanuc has tested for proper net-
work GSM operation. If you wish to access stations from the GSM across the network,
you must have a network card or PCMCIA adapter in your PC. The PC network card
must support NDIS (Network Driver Interface Specification). If you use a PC network
card not in the list below, GE Fanuc cannot guarantee proper operation of the GSM.
work GSM operation. If you wish to access stations from the GSM across the network,
you must have a network card or PCMCIA adapter in your PC. The PC network card
must support NDIS (Network Driver Interface Specification). If you use a PC network
card not in the list below, GE Fanuc cannot guarantee proper operation of the GSM.
Table 3-1. 802.3/Ethernet Cards for the PC
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Vendor
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Model
ÁÁÁÁÁ
ÁÁÁÁÁ
Size
ÁÁÁÁÁ
ÁÁÁÁÁ
PC Bus
ÁÁÁÁÁ
ÁÁÁÁÁ
Width
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
3Com
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Etherlink II
t
(3C503)
ÁÁÁÁÁ
ÁÁÁÁÁ
Half slot
ÁÁÁÁÁ
ÁÁÁÁÁ
XT, AT
ÁÁÁÁÁ
ÁÁÁÁÁ
8-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
3Com
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Etherlink 16
t
(3C507)
ÁÁÁÁÁ
ÁÁÁÁÁ
1 slot
ÁÁÁÁÁ
ÁÁÁÁÁ
XT, AT
ÁÁÁÁÁ
ÁÁÁÁÁ
8-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
3Com
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Etherlink/MC
t
(3C523)
ÁÁÁÁÁ
ÁÁÁÁÁ
1 slot
ÁÁÁÁÁ
ÁÁÁÁÁ
Micro Channel
ÁÁÁÁÁ
ÁÁÁÁÁ
8-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
SMC
/Western Digital
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
EtherCard PLUS
t
ÁÁÁÁÁ
ÁÁÁÁÁ
Half slot
ÁÁÁÁÁ
ÁÁÁÁÁ
XT, AT
ÁÁÁÁÁ
ÁÁÁÁÁ
8-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
SMC/Western Digital
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
EtherCard PLUS Elite 16
t
ÁÁÁÁÁ
ÁÁÁÁÁ
1 slot
ÁÁÁÁÁ
ÁÁÁÁÁ
AT
ÁÁÁÁÁ
ÁÁÁÁÁ
16-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
SMC/Western Digital
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
EtherCard PLUS/A
t
ÁÁÁÁÁ
ÁÁÁÁÁ
1 slot
ÁÁÁÁÁ
ÁÁÁÁÁ
Micro Channel
ÁÁÁÁÁ
ÁÁÁÁÁ
16-bit
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Intel
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Intel
82593
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
Interface is built-in to Zenith Z-note
t
PC
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Xircom
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
Xircom
ϖ
Pocket Adapter
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
External
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
Enhanced
Printer Port
Printer Port
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
N/A
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
NDIS supporting
network card
network card
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Vendor-dependent
t Etherlink II, Etherlink 16, and Etherlink M/C are trademarks of 3Com Corporation.
t EtherCard PLUS, EtherCard PLUS Elite16, and EtherCard PLUS/A are trademarks of Western Digital Corp.
t Z-Note is a trademark of Zenith Data Systems.
Intel is a Registered Trademark of Intel Corporation.
Xircom is a Registered Trademark of Xircom Incorporated.
SMC is a Registered Trademark of Standard Microsystems Corporation.
Note
The PC can lock-up if you make setup errors when installing PC
network cards and device drivers in a PC. Be sure you have a system
boot diskette to recover from possible setup errors.
network cards and device drivers in a PC. Be sure you have a system
boot diskette to recover from possible setup errors.
When installing the network card in your PC, be sure to do the following.
1.
Install the network card into the computer according to the manufacturer’s
instructions. Setup the hardware as described in the table below; these are the
default settings of the card. If you do not use the default settings, you will need to
record your settings for later use in the section, “Setting-Up DOS System Files”.
instructions. Setup the hardware as described in the table below; these are the
default settings of the card. If you do not use the default settings, you will need to
record your settings for later use in the section, “Setting-Up DOS System Files”.