GE GFK-1004B Manuel D’Utilisation
3
3-18
TCP/IP Ethernet Communications User’s Manual – January 1996
GFK-1004B
When the Edit configuration keys (Alt-E) are pressed in this menu, the GSM calls the
Configuration Editor required for that specific Station Type.
Configuration Editor required for that specific Station Type.
Figure 3-4. Configure a Station Screen
Creating a Station Configuration File
1.
Type in or select desired values for the STATION_NAME, STATION_TYPE fields, etc.
See the description of screen fields below.
See the description of screen fields below.
2.
Press Alt-E to enter the Configuration Editor.
Field Definitions for the Configure a Station Screen
STATION_NAME - A name (1 to 20 characters) which is used to uniquely identify the
station on the GSM hard disk.
STATION_TYPE - The type of device containing the LAN Interface.
H The value for this field is selected from a set of choices; press the Tab key to view
the choices. The available choices depend on what products have been installed
into the GSM system.
into the GSM system.
H To configure a TCP/IP Ethernet station, press the Tab key until SERIES 90-70
appears.
LOAD_TYPE - The type of station being configured. For the TCP/IP Ethernet station
press the Tab key until TCP appears.
MAC_ADDRESS - The 12 hex digit MAC address of the station being configured. This
will be either the Default MAC Address as delivered with your board, or a Locally
Administered MAC Address in the case where you have specified the MAC address
yourself. See the description on the structure of the MAC Address later in this sec-
tion and in Appendix G.
Administered MAC Address in the case where you have specified the MAC address
yourself. See the description on the structure of the MAC Address later in this sec-
tion and in Appendix G.