ZyXEL Communications 1000 Manuel D’Utilisation

Chapter 4 Installation Setup Wizard

ZyWALL USG 1000 User’s Guide

Use this screen to set how many WAN interfaces to configure and the first WAN 
interface’s type of encapsulation and method of IP address assignment.

The screens vary depending on the encapsulation type. Refer to information 
provided by your ISP to know what to enter in each field. Leave a field blank if you 
don’t have that information. 

Note: Enter the Internet access information exactly as your ISP gave it to you.

Figure 36   Internet Access: Step 1     

• I have two ISPs: Select this option to configure two Internet connections. 

Leave it cleared to configure just one. This option appears when you are 

configuring the first WAN interface.

• Encapsulation: Choose the Ethernet option when the WAN port is used as a 

regular Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection 

according to the information from your ISP.

• WAN Interface: This is the interface you are configuring for Internet access.
• Zone: Select the security zone to which you want this interface and Internet 

connection to belong. 

• IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP 

address. 

Select Static if the ISP assigned a fixed IP address.

This screen is read-only if you set the previous screen’s IP Address Assignment 
field to Auto. Use this screen to configure your IP address settings.