ZyXEL Communications 1000 Manuel D’Utilisation

 Chapter 5 Quick Setup

ZyWALL USG 1000 User’s Guide

This screen provides a read-only summary of the VPN tunnel’s configuration and 
also commands that you can copy and paste into another ZLD-based ZyWALL’s 
command line interface to configure it.

Figure 55   VPN Express Wizard: Step 4 

• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: IP address or domain name of the remote IPSec device. If 

this field displays Any, only the remote IPSec device can initiate the VPN 

connection.

• Pre-Shared Key: VPN tunnel password. It identifies a communicating party 

during a phase 1 IKE negotiation. 

• Local Policy: (Static) IP address and subnet mask of the computers on the 

network behind your ZyWALL that can use the tunnel.

• Remote Policy: (Static) IP address and subnet mask of the computers on the 

network behind the remote IPSec device that can use the tunnel. If this field 

displays Any, only the remote IPSec device can initiate the VPN connection.

• Copy and paste the Configuration for Secure Gateway commands into 

another ZLD-based ZyWALL’s command line interface to configure it to serve as 

the other end of this VPN tunnel. You can also use a text editor to save these 

commands as a shell script file with a “.zysh” filename extension. Then you can 

use the file manager to run the script in order to configure the VPN connection. 

See the commands reference guide for details on the commands displayed in 

this list.