ZyXEL Communications 1000 Manuel D’Utilisation

 Chapter 52 File Manager

ZyWALL USG 1000 User’s Guide

Your configuration files or shell scripts can use “exit” or a command line consisting 
of a single “!” to have the ZyWALL exit sub command mode.

Note: “exit” or “!'” must follow sub commands if it is to make the ZyWALL exit sub 

command mode.

Line 3 in the following example exits sub command mode.

Lines 1 and 3 in the following example are comments and line 4 exits sub 
command mode. 

Lines 1 and 2 are comments. Line 5 exits sub command mode. 

When you apply a configuration file or run a shell script, the ZyWALL processes the 
file line-by-line. The ZyWALL checks the first line and applies the line if no errors 
are detected. Then it continues with the next line. If the ZyWALL finds an error, it 
stops applying the configuration file or shell script and generates a log. 

You can change the way a configuration file or shell script is applied. Include 

setenv stop-on-error off 

in the configuration file or shell script. The ZyWALL 

ignores any errors in the configuration file or shell script and applies all of the valid 
commands. The ZyWALL still generates a log for any errors. 

interface ge1

ip address dhcp

!

!

interface ge1

# this interface is a DHCP client

!

! this is from Joe

# on 2008/04/05

interface ge1

ip address dhcp

!