Technicolor - Thomson 210i Manuel D’Utilisation

♦ 

ISP Name – Enter your ISP name. 

♦ 

Dial Number – Enter the ISDN access number provided by your ISP. 

♦ 

Username – Enter the username provided by your ISP. 

♦ 

Password – Enter the password provided by your ISP. 

♦ 

Require ISP Callback (CBCP) – If your ISP supports the callback function, 
check "Require ISP Callback (CBCP)" to enable the Callback Control 
Protocol during PPP negotiations. 

♦ 

Scheduler (1-15) – Enter up to 4 index numbers for calls that have been 
previously configured on the Call Schedule Setup windows (under Advanced 
Setup). 

♦ 

Link Type – There are four link types: 

   Link Disable - Disable the ISDN dial-out function. 
   Dialup 64Kbps - Use one ISDN B channel for Internet access. 
   Dialup 128Kbps - Use both ISDN B channels for Internet access. 
   Dialup BOD -BOD stands for bandwidth-on-demand. The router will 

use only one B channel under low traffic situations. Once the single B 
channel bandwidth is filled, the other B channel will be dialed automatically. 
For more detailed BOD parameter settings, refer to the Advanced Setup 
group

→

 Call Control and PPP/MP Setup. 

  None not included. 

♦ 

PPP Authentication – There are two types of authentication: 

   PAP Only - Set the PPP session to use the PAP protocol to negotiate 

the username and password with the ISP. 

   PAP or CHAP - Set the PPP session to use the PAP or CHAP 

protocols to negotiate the username and password with the ISP.