Technicolor - Thomson 210i Manuel D’Utilisation
SpeedTouch 210i
35
- Callback Budget: Specify a time budget for the callback function.
By default the budget is set to zero, which means no call back
attempt will work.
By default the budget is set to zero, which means no call back
attempt will work.
TCP/IP Network Settings
The following settings are required for proper LAN-to-LAN operation.
♦
My WAN IP – In most cases you may accept the default value in this field.
The router will then get a WAN IP address from the remote router during the
IPCP negotiation phase. If the WAN IP address is fixed by remote, specify the
fixed IP address here.
The router will then get a WAN IP address from the remote router during the
IPCP negotiation phase. If the WAN IP address is fixed by remote, specify the
fixed IP address here.
♦
Remote Gateway IP – Specify the IP address of the remote router.
♦
Remote Network IP – Specify the network identification of the remote
network. For example, 192.168.1.0 is a network identification of a class-C
subnet with netmask 255.255.255.0 (/24).
network. For example, 192.168.1.0 is a network identification of a class-C
subnet with netmask 255.255.255.0 (/24).
♦
Remote Network Mask – Specify the netmask of the remote network.
♦
RIP Direction – The option specify the direction of RIP (Routing Information
Protocol) packets through the ISDN WAN connection.
Protocol) packets through the ISDN WAN connection.
♦
RIP Version – Select the RIP protocol version. Specify Ver. 2 for greatest
compatibility.
compatibility.
♦
For NAT operation, treat remote sub-net as – Toggle between Private IP
and Public IP.
and Public IP.