AirLink PinPoint EDGE/GPRS Manuel D’Utilisation

AT Commands: Friends

Friends Mode can  limit access to the 

PinPoint

 from Your Wireless Service Provider’s network and 

the Internet. Friends Mode is a basic firewall. 

FM=n

Fn=[d.d.d.d]

Friends mode does not block any traffic from the cellular network, wanted or 

not. Friends Mode will only prevent the 

PinPoint

 from receiving data from those 

not on the Friends List.  It does not prevent data from traversing the network to the 
modem which may billable traffic.  

If you are using Friends Mode you will not be able to use Wireless Ace 

remotely or Telnet to the modem unless you are contacting the modem from one of 
the configured IP addresses.

Friends Mode - Only allow specified IPs to access the 

PinPoint

. 

n=0 : Disable Friends mode 

n=1 : Enable Friends mode - Only packets from friends will be accepted (see below); packets from other 
IP addresses are ignored. 

Friends mode IP address. 

n=0 - 9 Friends list index .

d.d.d.d =IP address