AirLink PinPoint EDGE/GPRS Manuel D’Utilisation
PinPoint EDGE/GPRS - User Guide, version 2.32
58
Specifications for the PinPoint EDGE/GPRS
Power Management:
•
Advanced Power Management features
•
Low power consumption
•
Dormant connection (idle for 10-20 seconds): 60 mA at 12 VDC
•
Input Voltage: 9 VDC to 28 VDC
•
Input Current: 20 mA to 350 mA
•
Typical Transmit/Receive: 300ma at 12VDC
•
Low power mode: 20 mA at 12 VDC
Power consumption
Modem
Idle
Transmitting
PinPoint
80 mAh
300 mAh
Serial Port Pinouts
The cable between the PinPoint and a computer or other serial device needs to be wired straight-
through (pin 1 goes to pin 1, pin 2 to pin 2, etc.). If your end device connected to the PinPoint is a DCE device, you will need a null-modem cable.
through (pin 1 goes to pin 1, pin 2 to pin 2, etc.). If your end device connected to the PinPoint is a DCE device, you will need a null-modem cable.
FIGURE 1.
: Female DB-9 DCE