AIS AI2524 Manuel D’Utilisation

August 1997

Page 10-1

2524UM

This chapter describes how to configure synchronous serial interfaces.

The synchronous serial interfaces are configured to allow connection 
to WANs. Once the Ethernet or Token Ting port on your router has 
been configured, complete these steps to configure the synchronous 
serial interfaces:

1.

Press <Enter> or type yes to configure serial port 0:

Configuring interface Serial0:

  Is this interface in use? [yes]:

2.

Determine which protocols you want on the synchronous serial 
interface and enter the appropriate responses:

Configure IP on this interface? [yes]:

Configure IP unnumbered on this interface? [no]:

   IP address for this interface: 172.16.73.1

   Number of bits in subnet field [8]:

   Class B network is 172.16.0.0, 8 subnet bits; mask is

   255.255.255.0

Configure AppleTalk on this interface? [no]: yes

   Extended AppleTalk network? [yes]:

   AppleTalk starting cable range [2]: 4

   AppleTalk ending cable range [3]: 4

   AppleTalk zone name [myzone]: ZZ Serial

   AppleTalk additional zone name: 

Configure IPX on this interface? [no]: yes

   IPX network number [2]: B002