AIS AI2524 Manuel D’Utilisation
AI2524 Router Card User’s Manual
Page 12-56
August 1997
2524UM
Configuration for Router B
interface serial 0
ip 172.20.170.3 255.255.255.0
x25 address 31370054065
x25 map ip 172.20.170.1 31370054068
x25 map ip 172.20.170.2 31370054068
!
interface serial 3
ip 172.20.170.4 255.255.255.0
x25 address 31370054067
x25 map ip 172.20.170.2 31370054069
x25 map ip 172.20.170.1 31370054069
(allow either destination address)
x25 31370054065 alias serial3
x25 31370054067 alias serial0
Example: Booting from a Network Server over X.25
Over X.25, you cannot boot the router from a network server via a
broadcast. Instead, you must boot from a specific host. Also, an
broadcast. Instead, you must boot from a specific host. Also, an
x25
map
command must exist for the host that you boot from. The
x25
map
command is used to map an IP address into an X.121 address.
There must be an
x25 map
command that matches the IP address
given on the
boot system
command line.
boot system gs3-k.100 172.18.126.111
interface Serial 1
ip address 172.18.126.200 255.255.255.0
encapsulation X25
x25 address 10004
x25 map IP 172.18.126.111 10002 broadcast
lapb n1 12040
clockrate 56000
In this case, 10002 is the X.121 address of the remote router that can
get to host 172.18.126.111.
get to host 172.18.126.111.
The remote router must have this
x25 map
entry:
x25 map IP 172.18.126.200 10004 broadcast