AIS AI2524 Manuel D’Utilisation
Chapter 13: AI2524 Frame Relay Configuration Steps
August 1997
Page 13-47
2524UM
Monitor the
Frame Relay
Connections
Frame Relay
Connections
To monitor Frame Relay connections, perform any of these tasks in
EXEC mode:
EXEC mode:
z
Clear dynamically created Frame Relay maps, which are created
by the use of Inverse ARP.
by the use of Inverse ARP.
clear frame-relay-inarp
z
Display information about Frame Relay DLCIs and the LMI.
show interfaces serial
number
z
Display LMI statistics.
show frame-relay lmi [
type number ]
z
Display the current Frame Relay map entries.
show frame-relay
map
z
Display PVC statistics.
show frame-relay pvc [
type number [dlci]]
z
Display configured static routes.
show frame-relay
route
z
Display Frame Relay traffic statistics.
show frame-relay traffic
z
Display information about the status of LAPF.
show frame-relay lapf
z
Display all the SVCs under a specified map list.
show frame-relay svc
maplist
Example: Configuration Providing Backward Compatibility
This example configuration provides backward compatibility and in-
teroperability with earlier versions that are not compliant with RFC
1490. The ietf keyword is used to generate RFC 1490 traffic. This con-
figuration is possible because of the flexibility provided by separately
defining each map entry.
teroperability with earlier versions that are not compliant with RFC
1490. The ietf keyword is used to generate RFC 1490 traffic. This con-
figuration is possible because of the flexibility provided by separately
defining each map entry.
encapsulation frame-relay
frame-relay map ip 131.108.123.2 48 broadcast ietf