AIS AI2524 Manuel D’Utilisation
AI2524 Router Card User’s Manual
Page 16-18
August 1997
2524UM
6.
Return to user EXEC mode:
Router(config-if)# exit
Router(config)# exit
Router# exit
Router>
Specifying the
Boot Method
Boot Method
You can enter multiple boot commands in the configuration in
NVRAM to provide a backup method for loading the Cisco IOS image
onto the router. The router boots using the first boot command that
succeeds. If you enter multiple boot commands, the router executes
them in the order they are entered. There are two ways to load the
Cisco IOS image: from Flash memory or from a TFTP server on the
network.
NVRAM to provide a backup method for loading the Cisco IOS image
onto the router. The router boots using the first boot command that
succeeds. If you enter multiple boot commands, the router executes
them in the order they are entered. There are two ways to load the
Cisco IOS image: from Flash memory or from a TFTP server on the
network.
1.
Flash memory
Information stored in Flash memory is not vulnerable to network
failures that might occur when you load system software from
servers. In this example, replace filename with the filename of the
Cisco IOS image:
failures that might occur when you load system software from
servers. In this example, replace filename with the filename of the
Cisco IOS image:
Router> enable
Password: enablepassword
Router# configure terminal
Router (config)# boot system flash filename
Router (config)# Ctrl-Z
Router# copy running-config startup-config
Building configuration...
[OK]
Router# exit
Router>