Klark Teknik DN 9650 Manuel D’Utilisation

12

NETWORK section   This section shows the 
status of the network module connection, as 
follows:

• Constantly illuminated green with red 

extinguished = cable/fibre is synchronised, 
but there is no audio activity.

• Pulsating green with red extinguished = 

cable/fibre is on with audio activity.

• Green extinguished with red illuminated = 

cable/fibre are off.

ASYNCHRONOUS SAMPLE RATE 
CONVERTER section (DN9652 only)   This 
section shows the status of the configured 
clock source, which can be ASRC or network 
output.  Each source has a yellow ENABLED 
LED, which illuminates to show that the source 
is enabled.  The DN9652 also has the facility to 
stop the output clock if the input clock fails.  
This condition is indicated by the illumination of 
the red STOPPED LED.

For the LED status, see Table 2 “DN9652 ASRC 
LED status” on page 13.

LCD display   This backlit, alphanumeric 
display has two rows of 16 digits.  During boot 
up the display shows the unit’s current 
IP address and  subnet mask for about five 
seconds and then the user-configured text 
thereafter.

Klark Teknik roundel   Has a blue backlight, 
which illuminates to show that power is on.

Cut-out   There are four cut-outs for rack 
mount fixings.

N/A