Conceptronic Wireless 54Mbps USB Stick Adapter Manuel D’Utilisation

Sharing (ICS) utility provided with Windows XP, Windows 2000, Windows ME
or Windows 98SE.

Please follow your software documentation to properly configure the
Internet sharing software after you install your wireless networking
adapters. To install your wireless network adapter follow the instructions
on the next page.

If the Internet Sharing Software will be installed on the same computer

into which you are installing the C54U, then follow these steps:

1. Install the C54U Wireless USB Stick Adapter.

2. Check the Device Manager to confirm that your adapter is installed

correctly. .

3. Install your Internet Sharing Software.

4. If required by the software, set the static IP Address for the

wireless adapter.

Note: The IP Address for all the computers on the network must be in the same
IP Address range, and the Subnet Mask must be the same for all the computers on

the network. For example: If the first computer is assigned an IP Address of
10.0.0.2 with a Subnet Mask of 255.0.0.0, then the second computer can be

assigned an IP address of 10.0.0.3 with a Subnet Mask of 255.0.0.0, etc.

If the Internet Sharing Software will be installed on a computer other than
the one in which you are installing the C54U Wireless USB Stick Adapter,
then follow these steps:

1. Install the C54U into the computer.

2. Check the IP Address for the wireless adapter. Please make certain

that all the computers on your network are in the same IP Address
range. .

Note: By default, the wireless adapter is set to obtain a Dynamic IP
Address, automatically.