Canon SX7 Manuel D'Instructions

107

SE
TTING

 UP FU

NCTIO

N

S FROM MEN

U

S

Setting Auto Setup Function

[Auto setup]

You can select an item you want to enable in the
auto setup function.

T

T

Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.

Selecting the Power Management Mode

[Power management mode]

You can turn off the lamp or projector automati-
cally for saving power.

T

T

Press the [OK] button to confirm, and then press
the [MENU] button.

System settings

Auto setup

Enables/disables the auto focusing.

Enables/disables the auto keystone
correction.

Enables/disables the auto input
selection.

Enables/disables the auto screen
color correction.

z A confirmation screen appears during

the auto setup so that you can check
which functions are enabled/disabled
(P44, 68).

z You can manually adjust each item.

[Auto focus]: [FOCUS] button (P49)
[Auto keystone]: [KEYSTONE] button
(P50)
[Auto input]: [INPUT] button (P46, 68)
[Auto screen color]: Menu function
(P96)

z If you select [16:9 D. image shift] for

[Screen aspect], you cannot change
the setting of each item. The auto
setup function will also be disabled.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Auto focus

Auto keystone

Auto input

Auto screen color

System settings

Power management mode

Disables the power management
mode.

Enters the power management
mode. The projector restarts projec-
tion when a signal is inputted or any
operation button is pressed.

Enters the exit mode and turns off
the projector automatically.

z You cannot enable the [Direct Power

on] function if you select [Off].

z The [POWER] indicator flashes red

and green during the power manage-
ment mode.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Off

Standby

Exit