Canon SX7 Manuel D'Instructions

116

MAINT

ENANCE

Clean the projector frequently to prevent dust from settling on the surface.
A dirty lens may ruin the quality of the projected image.

Wipe the projector's main unit softly with a soft cloth.
If the projector is heavily soiled, soak the cloth in water with a small amount of detergent in
it, squeeze the cloth very well, and then wipe the projector with it. After cleaning, wipe the
projector with a dry cloth.

z The main unit is very hot immediately after turning off the projector. Wait until the pro-

jector cools down sufficiently (approx. 5 minutes) before cleaning the projector. Other-
wise, you may get burned or injured.

z Before cleaning the projector, be sure to remove the power plug from the AC outlet.

Otherwise, electric shock or fire may result.

z Never use volatile cleaning liquid or benzine, as these may damage the finish of the

projector. When using a chemical dust cloth, make sure to read the instructions thor-
oughly.

z When cleaning the projector's lens, use a commonly available air blower or lens

cleaning paper. The lens surface is easily damaged, so do not use a hard cloth or tis-
sues.

When Not Used for an Extended Period of Time
Be sure to attach the lens cap on the lens and store in the supplied carrying bag.