Canon SX7 Manuel D'Instructions
2
Quick Reference – How to start projection
Computer
1.
Install the projector.
P30-31
z
Install the projector at the desired distance from the screen.
2.
Connect the projector.
P34-37
z
Connect the projector and the computer with a cable.
3.
Turn on the projector.
P38-39
z
Connect the power cord and turn on the projector.
z
Adjust the height of the projecting image (P41).
z
Select a display language when turning on the projector for the first time (P39).
4.
Press the
button.
P44
z
Adjust the focus of the screen.
5.
Set up the computer.
P42-43
z
Turn on the computer and set the resolution.
6.
Select the input signal by pressing the
button.
P46-48
z
Select an appropriate input signal in accord with the signal from the computer.
7.
Press the
button again.
P44
z
Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
auto setup function.
8.
Press the
button.
P52
z
Optimize the input signal with the auto PC function (Skip this step if the projector
is projecting an image properly.)
is projecting an image properly.)
9.
Select the image mode with the
button.
P53-54
z
Select an appropriate image mode for projection.
z
Specify the aspect ratio or display area in the [Aspect] menu as required (P55,
88).
88).
10.
Start the presentation.
P76-81
z
Set the useful functions available during the presentation from the remote control.
Turn off the projector
P58-59
z
Turn off the projector and unplug the power cord.
Finishing the projection...