Canon SX7 Manuel D'Instructions
31
SET
TING
UP THE
TING
UP THE
PRO
JEC
TOR
TOR
Determining the Installation Position
Placing in Front of the Screen
Place the projector perpendicular to the screen
as far as possible.
as far as possible.
Placing on a Level Place
Place the projector on a level place as far as pos-
sible.
sible.
z A slight error in the projection angle can be
corrected using the [KEYSTONE] button
(P50).
(P50).
z A slight tilt can be corrected using the rear
adjustable foot. (P41)
z Make sure that the installation position is
free from any obstacle that may block the
exhaust vent (fan) on the right side of the
projector and the air intake vent on the bot-
tom of the projector.
exhaust vent (fan) on the right side of the
projector and the air intake vent on the bot-
tom of the projector.
z The screen must not be exposed to direct
sunlight or light from lighting equipment. In a
bright room, it is recommended to limit
ambient lighting in order to improve the
image quality.
bright room, it is recommended to limit
ambient lighting in order to improve the
image quality.
Screen
Optical axis
Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (Ceiling mounted) with it turned up side
down or place it behind the screen (Rear) if you use a translucent screen.
If you mount the projector on the ceiling, you have to invert the projected image (P95).
You can mount the projector on the ceiling (Ceiling mounted) with it turned up side
down or place it behind the screen (Rear) if you use a translucent screen.
If you mount the projector on the ceiling, you have to invert the projected image (P95).
Ceiling Mounting
Rear Projection