Canon SX7 Manuel D'Instructions
67
PRO
JE
CTIN
G
AN IMAGE
FROM A
V
EQU
IPME
NT
Projecting a Video Image from an AV Equipment
You can project a video image with the steps similar to those for projecting an image from a
computer.
This section provides information specific to the projection from an AV equipment.
computer.
This section provides information specific to the projection from an AV equipment.
For more detailed information for each step, refer to the corresponding page.
1
Turn on the projector.
P38*
z Connect the power cord and turn on the projector.
P38
z Adjust the height of the projecting image.
P41
z Select a display language for the first time.
P39
z Adjust the focus by performing the auto setup or the focus adjustment if you can-
not read the message due to out of focus.
P44, 49
2
Prepare the AV equipment.
z Turn on the AV equipment and start playing the video image.
z Turn on the AV equipment and start playing the video image.
3
Press the
button to switch the input signal.
P68
z Select [DIGITAL VIDEO] as the input signal.
4
Press the
button.
P68
z Adjust the input signal, focusing, keystone distortion, and so on automatically
using the auto setup function.
5
Press the
button.
z Select an appropriate image mode depending on the projecting image.
P53*
z Select an appropriate screen mode from the [Aspect] menu.
P71, 88, 89
Turn off the projector.
P58*
z Turn off the projector and remove the power cord from the AC outlet.
* Those steps are same as those for projecting the computer screen.
For digital content video image:
Stopping projection...